TOBO STEEL GROUP CHINA
TOBO ALLOY GROUP TOBO Alloy Group is a mature, steady and energetic high-tech company, specializing in manufacture of high-temperature alloys and corrosion resistant alloys, such as Hastelloy, Haynes,
Add to Cart
high quality carbon steel stainless steel alloy steel concentric reducer eccentric reducer butt weld pipe fittings
| Product Name | Concentric Reducer / Eccentric Reducer. |
| Size | 1/2"--72" |
| Thickness | SCH40 SCHSTD SCHXS SCH80 SCH160 SCHXXS etc. |
| Standard | ANSI B16.9 / DIN2616 |
Rich could produce different ranges of stainless steel, alloy steel, carbon steel flanges, elbows, tees, reducers, caps, the socket series of pipeline components with high and medium pressure, and various specifications, material steel pipe.
Introduction
Reducer, also known as reducer, is one of the chemical pipe fittings, which is used for the connection of two different pipe diameters. It is also divided into concentric reducer and eccentric reducer.
The big and small heads whose center is in a straight line are called concentric big and small heads. The commonly used forming process is reduced diameter pressing, expanded diameter pressing or reduced diameter plus expanded diameter pressing. Stamping can also be used for reducing pipes of some specifications.
Overview and features:Alloy K-500
N05500 copper nickel alloy combines the advantages of Monel's excellent corrosion resistance for 400 years, with greater strength and hardness. These amplification properties, strength and hardness are affected by the addition of aluminum and titanium nickel copper base and heat treatment for precipitation, commonly known as age hardening or aging. Under age hardening conditions, n05500 has a greater tendency to stress corrosion cracking than Monel 400 in some environments. The yield strength and tensile strength of n05500 alloy are about three times that of Monel 400. In addition, it can further strengthen the work before cold precipitation hardening. The strength of this nickel steel alloy is maintained at 1200 ° F, but the toughness is maintained. It is difficult to melt at 400 ° F. the melting range is 2400 - 2460 ° F.
This nickel alloy is spark resistant and non-magnetic - 200 ° F However, a magnetic layer surface can be developed during material processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film. Pickling or bright pickling can remove this magnetic film and restore non-magnetic properties
